Install guide

Install guide

If you want to remote install NetVizor, please check the Remote install and configuration guide

Step 1
Your first step is to copy the NVClientInstall.exe file to a PC you want to start monitoring. Once you have the file on the PC - double click the NVClientInstall.exe icon to start the install (or right click on it - then select Open)

NOTE: After install is complete you can delete this file!

Step 2
The installation for NetVizor will only take a few seconds - and installs in total stealth - preconfigured - and will start monitoring the PC immediately. The client is installed in nvclient program files folder (as pictured above).

Step 3
The NetVizor client is already configured to monitor the PC optimally. However, as a network admin, you may want to enable user tracking - so you can monitor network users from a central location. To do so access the NetVizor client (as described in your NetVizor help documentation).

When you have the NetVizor window open you will want to click on Activity Logging -> Configure Log Storage Location.

Step 4
You will need to enter a centralized shared folder that all PC’s on your network have read/write access to. This is where each PC’s logs will be stored.

We recommend naming the shared folder ‘logs$’ - or a name that ends with a ‘$’ - the $ indicates the folder is hidden on the network - so users will not be able to browse/view it. We also recommend choosing the ‘Categorize logs’ feature so that the Viewer views this computer’s logs categorized by username. If you choose to not categorize logs you will still be able to view logs for this computer via the NetVizor viewer’s interface, but all logs will contain activities for all users on that computer, as opposed to sorting them by username.

Once you have a shared folder setup, and entered into NetVizor, click OK to save. You will be prompted to restart NetVizor. You can run it from the program files\nvclient\sysdiag.exe location mentioned previously in this install guide.

Step 5
Now that the NetVizor client is configured properly now you will have to setup the viewer for centralized network viewing. By default, PC’s on your network will automatically list in the Resource list in the NetVizor viewer - but you have to configure the viewer to ’see’ the roving users.

Click on Log Storage Locations to start the configuration.

Step 6
This folder is the same folder you configured for the NetVizor client’s you previously configured. If the viewer is installed on the PC with the shared folder that is being used for storage then you can use the local path - as shown above. Otherwise you can use the same shared path you used for all of the client’s you previously installed. Notice that you can add more than one storage location to this list - this way you can view multiple share locations from multiple subnets and servers.

Once you set the folder location click Save to proceed.

Step 7
Click on "Refresh All" to refresh the Network Users list - this should show all the network users that are being logged by the client’s that you installed - as well as PC’s on your network.

Step 8
To view a User’s activities highlight a username then click the "View Activities" button. You will be presented with a menu to select what activities you wish to view for the remote user.

Step 9
For additional flexibility, you can configure NetVizor to scan IP addresses that may be outside your local network, or on another subnet within your network. You can add these IP’s to the IP List Configuration - then check the "Check these IP’s…" option. These IP’s will be scanned to see if they are online or not when you load NetVizor